Do you want to be informed on new Posts on this Thread? (members only)
S&S Swan General - Can some one help with drawings of stemhead plate and diesel tank for swan 44, please |
---|
Join Date: 30 November 2011
Posts: 18 |
||
---|---|---|
Can some one help with drawings of stemhead plate and diesel tank for swan 44, please Hello everyone I am looking for some help help with drawings of stemhead plate and diesel tank for swan 44, please. My stemhead plate made from aluminum and have some cracks on the front. I want to make one from 316l, I just wondering if some one did this already? also looking for drawings for diesel tank, I want to change - make anew one, because old one have point corrosion. I am living on the small island in Carribian, and hurricane season is started. Kind regards odiss (44/02 KIPRIDA) |
Join Date: 01 May 2017
Posts: 16 |
||
---|---|---|
Not long ago, Lars suggested to me to contact spareparts@nautors-swan.com for drawings of keel bolt diagrams. I submitted a request to the link and received detailed drawings/diagrams within a few days. Worth a shot. Cheers. |
Join Date: 29 January 2007
Posts: 1022 |
||
---|---|---|
Dear Odiss, Niels did a fantastic job when he built a new steamplate on his S&S Swan 44/014 Four Winds, I suggest you to login on his blog (https://fourwinds1973.wordpress.com) to see details and maybe you will find worth getting in touch with him. Hope this helps. Fair winds! matteo (47/069 Vanessa) |
Join Date: 29 January 2007
Posts: 1022 |
||
---|---|---|
...by the way Laurent von Saenger, of Strat-O-Sphere, a few years ago as far as I remember, made a 316 steamhead plate for S&S Swan 44/011 Pippus too: strat.o.sphere@cegetel.net Fair winds! matteo (47/069 Vanessa) |
- Threads : 1707
- Posts : 10233
- Members: 821
- Online Members: 1