S&S Swan Association

S&S Swan Maintenance - Question for Lars - Swan 411

28 December 2010 - 23:29 #1 Post Reply
marvin Join Date: 21 September 2010 Posts: 53
Question for Lars - Swan 411 Lars At the front of the cockpit under the step to the bridge deck there are three fixing bolts that hold the deck and hull joint together. This is one of the areas that allows water ingress if the bolts either become loose or the sealant looses its integrity. Were these bolts fitted to hold the joint during the glassing process and are now redundant or are they still essential to maintain boat integrity? Happy New Year Lars David (Baron - Swan 411/033)

29 December 2010 - 11:14 #2 Post Reply
danielefua Join Date: 30 January 2007 Posts: 467
Marvin, Lars will reply with more knowledge but, as another 411 owner, you raised my curiosity. To be frank I do not understand what you mean and I wish you could post pictures. Regards Daniel, 411-004

30 December 2010 - 08:17 #3 Post Reply
David Thank you for the greetings - same to you, and to all Forum members. I am surprised to hear that there is a joint, agree with Daniel that a picture would be helpful. Kind regards Lars

30 December 2010 - 08:17

Post Reply

Join Date: 02 January 2008
Posts: 1547

David

Thank you for the greetings - same to you, and to all Forum members.

I am surprised to hear that there is a joint, agree with Daniel that a picture would be helpful.

Kind regards

Lars