S&S Swan Association

S&S Swan General - Trim screws and boot top Swan 41

22 May 2011 - 16:45 #1 Post Reply
FrankH Join Date: 26 May 2007 Posts: 9
Trim screws and boot top Swan 41 Dear all, I would like to check the trim of my 41 but unfortunately the trim screw in the stem has been removed at some time. Can anyone tell me where this was originally located, measured from the lower end of the stainless steel stem fitting? I would also like to restore the original double boot top, at some point in time the in-between bit has been painted over so Manouche currently has one very broad boot top/waterline. Can anyone provide me with the correct width and position of the boot top on a 41? Many thanks and kind regards, Frank Hoogendijk 41/058 Manouche

23 May 2011 - 23:15 #2 Post Reply
matteosalamon Join Date: 29 January 2007 Posts: 1022
Dear Frank, you can ask S&S office in NYC the relative drawing with exact details and measurments of stripes (which have different heights at the stern and bow) Fair winds! Matteo (38/067 Only You)